Question 1

​If a cutting plane line passes perpendicularly through the axis of a fastener or shaft, the fastener or shaft is not sectioned.

Accepted Answer

A) True 
 B)False

Question 2

​Which of the following is not true regarding alternate section lining?

Accepted Answer

A) ​It is a combination of true projection and correct representation. 
B) ​Over the rib or web section, every other section line is drawn. 
C)  ​The rib or web section is not lined. 
D)  ​The actual shape is indicated by hidden lines. 
A) ​It is a combination of true projection and correct representation. 
B) ​Over the rib or web section, every other section line is drawn. 
C)  ​The rib or web section is not lined. 
D)  ​The actual shape is indicated by hidden lines.

Question 3

​In a half section, what percentage of the material is sectioned from the object?

Accepted Answer

A) ​75% 
B) ​50% 
C)  ​25% 
D)  ​depends on the object 
A) ​75% 
B) ​50% 
C)  ​25% 
D)  ​depends on the object

Question 4

​A removed section is sometimes drawn to a larger scale to illustrate and/or dimension a small feature.

Accepted Answer

A) True 
 B)False

Question 5

​The cutting plane is represented by a:

Accepted Answer

A) ​thin, black, solid line 
B) ​thick, black, solid line 
C)  ​thick, black, dashed line 
D)  ​thick, black, dotted line 
A) ​thin, black, solid line 
B) ​thick, black, solid line 
C)  ​thick, black, dashed line 
D)  ​thick, black, dotted line

Question 6

​Arrowheads at the ends of the cutting plane line indicate:

Accepted Answer

A) ​where the object is sliced by the cutting plane 
B) ​direction of the cut 
C)  ​what cutting plane line is to be used 
D)  ​direction of sight 
A) ​where the object is sliced by the cutting plane 
B) ​direction of the cut 
C)  ​what cutting plane line is to be used 
D)  ​direction of sight

Question 7

​What must be included for each part in an assembly section?

Accepted Answer

A) ​name of the part 
B) ​part number of plan number 
C)  ​quantity required to complete one assembly 
D)  ​all of the above 
A) ​name of the part 
B) ​part number of plan number 
C)  ​quantity required to complete one assembly 
D)  ​all of the above

Question 8

​To indicate that a sectioned part is made of brass, it is best to:

Accepted Answer

A) ​add a note to the drawing 
B) ​label the part 
C)  ​use appropriate section lines 
D)  ​add a note in the title block 
A) ​add a note to the drawing 
B) ​label the part 
C)  ​use appropriate section lines 
D)  ​add a note in the title block

Question 9

​Cutting plane lines compared to section lines are:

Accepted Answer

A) ​dashed 
B) ​thinner 
C)  ​the same size 
A) ​dashed 
B) ​thinner 
C)  ​the same size

Question 10

​The lines in a section view used to show where the material is cut, and in some cases to identify the type of material, are called:

Accepted Answer

A) ​cutting lines 
B) ​section lines 
C)  ​object lines 
D)  ​hidden lines 
A) ​cutting lines 
B) ​section lines 
C)  ​object lines 
D)  ​hidden lines

Question 11

​The primary difference between a full section and an offset section is that the cutting plane is not straight in an offset section.

Accepted Answer

A) True 
 B)False

Question 12

​The "general" symbol used for sectioning is actually the _____ symbol.

Accepted Answer

A) ​cast iron 
B) ​steel 
C)  ​brass 
D)  ​wood 
A) ​cast iron 
B) ​steel 
C)  ​brass 
D)  ​wood

Question 13

​A removed section is very similar to a rotated section except that it is drawn away from the regular view.

Accepted Answer

A) True 
 B)False

Question 14

​If an object has a part to be sectioned that is not true size, this type of sectional view must be used.

Accepted Answer

A) ​offset 
B) ​auxiliary view 
C)  ​removed 
D)  ​partial 
A) ​offset 
B) ​auxiliary view 
C)  ​removed 
D)  ​partial

Question 15

​A revolved section is the same as a rotated section.

Accepted Answer

A) True 
 B)False

If a cutting plane line passes perpendicularly through the axis of a fastener or shaft, the fastener or shaft is not sectioned.

Which of the following is not true regarding alternate section lining?

In a half section, what percentage of the material is sectioned from the object?

A removed section is sometimes drawn to a larger scale to illustrate and/or dimension a small feature.

The cutting plane is represented by a:

Arrowheads at the ends of the cutting plane line indicate:

What must be included for each part in an assembly section?

To indicate that a sectioned part is made of brass, it is best to:

Cutting plane lines compared to section lines are:

The lines in a section view used to show where the material is cut, and in some cases to identify the type of material, are called:

The primary difference between a full section and an offset section is that the cutting plane is not straight in an offset section.

The "general" symbol used for sectioning is actually the _____ symbol.

A removed section is very similar to a rotated section except that it is drawn away from the regular view.

If an object has a part to be sectioned that is not true size, this type of sectional view must be used.

A revolved section is the same as a rotated section.

Introduction

Employability Skills for Drafting and Design Technicians

Drafting Tools: Conventional, Cad, and Solid Modeling

Sketching and Lettering for Engineering Communication

Geometric Construction

Spatial Visualization and Multiview Drawings

Dimensioning and Notation

Auxiliary Views

Descriptive Geometry

Patterns and Developments

Solid 3D Modeling: Computational Design and Analysis

Geometric Dimensioning and Tolerancing

Fasteners

Springs

Cams

Gears

Assembly and Detail Drawings for Design

Pictorial Drawings

Welding

Modern Manufacturing: Materials, Processes, and Automation

The Design Process and Advanced Concepts

Filters

Exam 8: Sectional Views

​If a cutting plane line passes perpendicularly through the axis of a fastener or shaft, the fastener or shaft is not sectioned.

​Which of the following is not true regarding alternate section lining?

​In a half section, what percentage of the material is sectioned from the object?

​A removed section is sometimes drawn to a larger scale to illustrate and/or dimension a small feature.

​The cutting plane is represented by a:

​Arrowheads at the ends of the cutting plane line indicate:

​What must be included for each part in an assembly section?

​To indicate that a sectioned part is made of brass, it is best to:

​Cutting plane lines compared to section lines are:

​The lines in a section view used to show where the material is cut, and in some cases to identify the type of material, are called:

​The primary difference between a full section and an offset section is that the cutting plane is not straight in an offset section.

​The "general" symbol used for sectioning is actually the _____ symbol.

​A removed section is very similar to a rotated section except that it is drawn away from the regular view.

​If an object has a part to be sectioned that is not true size, this type of sectional view must be used.

​A revolved section is the same as a rotated section.

Introduction

Employability Skills for Drafting and Design Technicians

Drafting Tools: Conventional, Cad, and Solid Modeling

Sketching and Lettering for Engineering Communication

Geometric Construction

Spatial Visualization and Multiview Drawings

Dimensioning and Notation

Auxiliary Views

Descriptive Geometry

Patterns and Developments

Solid 3D Modeling: Computational Design and Analysis

Geometric Dimensioning and Tolerancing

Fasteners

Springs

Cams

Gears

Assembly and Detail Drawings for Design

Pictorial Drawings

Welding

Modern Manufacturing: Materials, Processes, and Automation

The Design Process and Advanced Concepts

Filters

If a cutting plane line passes perpendicularly through the axis of a fastener or shaft, the fastener or shaft is not sectioned.

Which of the following is not true regarding alternate section lining?

In a half section, what percentage of the material is sectioned from the object?

A removed section is sometimes drawn to a larger scale to illustrate and/or dimension a small feature.

The cutting plane is represented by a:

Arrowheads at the ends of the cutting plane line indicate:

What must be included for each part in an assembly section?

To indicate that a sectioned part is made of brass, it is best to:

Cutting plane lines compared to section lines are:

The lines in a section view used to show where the material is cut, and in some cases to identify the type of material, are called:

The primary difference between a full section and an offset section is that the cutting plane is not straight in an offset section.

The "general" symbol used for sectioning is actually the _____ symbol.

A removed section is very similar to a rotated section except that it is drawn away from the regular view.

If an object has a part to be sectioned that is not true size, this type of sectional view must be used.

A revolved section is the same as a rotated section.