Question 1

A continuous load is defined as a load ____.

Accepted Answer

A)  having the maximum level of current sustained for three hours or more 
B)  having the maximum level of current sustained for two hours or more 
C)  on any general purpose receptacle 
D)  on any dedicated receptacle 
A)  having the maximum level of current sustained for three hours or more 
B)  having the maximum level of current sustained for two hours or more 
C)  on any general purpose receptacle 
D)  on any dedicated receptacle

Question 2

Branch circuits shall be rated in accordance with the maximum permitted ampere rating or setting of the ____.

Accepted Answer

A)  overcurrent device 
B)  load 
C)  receptacle 
D)  conductor 
A)  overcurrent device 
B)  load 
C)  receptacle 
D)  conductor

Question 3

A ballast in a fluorescent exit luminaire shall ____.

Accepted Answer

A)  have GFCI protection 
B)  have thermal protection 
C)  not have thermal protection 
D)  not have GFCI protection 
A)  have GFCI protection 
B)  have thermal protection 
C)  not have thermal protection 
D)  not have GFCI protection

Question 4

When considering receptacle volt-ampere rating, a single piece of equipment (consisting of four or more receptacles) must be calculated at not less than ____ volt-amperes per receptacle.

Accepted Answer

A)  40 
B)  80 
C)  90 
D)  120 
A)  40 
B)  80 
C)  90 
D)  120

Question 5

____ applies to the wall placement provisions for commercial occupancies.

Accepted Answer

A)  The 6-ft rule 
B)  The 8-ft rule 
C)  The 12-ft rule 
D)  No rule (the 6-ft provisions applies to dwelling units only) 
A)  The 6-ft rule 
B)  The 8-ft rule 
C)  The 12-ft rule 
D)  No rule (the 6-ft provisions applies to dwelling units only)

A continuous load is defined as a load ____.

Branch circuits shall be rated in accordance with the maximum permitted ampere rating or setting of the ____.

A ballast in a fluorescent exit luminaire shall ____.

When considering receptacle volt-ampere rating, a single piece of equipment (consisting of four or more receptacles) must be calculated at not less than ____ volt-amperes per receptacle.

____ applies to the wall placement provisions for commercial occupancies.

Introduction to the National Electrical Code

Definitions

Boxes and Enclosures

Cables

Raceways and Conductors

General Provisions

Specific Provisions

Load Calculations

Services and Electrical Equipment

Comprehensive Provisions

Load Calculations

Nondwelling Load Calculations

Services, Feeders, and Equipment

Hazardous Classified Locations

Health Care

Industrial Locations

Special Occupancies

Specific Equipment

Filters

Exam 12: General Provisions

A continuous load is defined as a load ____.

Branch circuits shall be rated in accordance with the maximum permitted ampere rating or setting of the ____.

A ballast in a fluorescent exit luminaire shall ____.

When considering receptacle volt-ampere rating, a single piece of equipment (consisting of four or more receptacles) must be calculated at not less than ____ volt-amperes per receptacle.

____ applies to the wall placement provisions for commercial occupancies.

Introduction to the National Electrical Code

Definitions

Boxes and Enclosures

Cables

Raceways and Conductors

General Provisions

Specific Provisions

Load Calculations

Services and Electrical Equipment

Comprehensive Provisions

Load Calculations

Nondwelling Load Calculations

Services, Feeders, and Equipment

Hazardous Classified Locations

Health Care

Industrial Locations

Special Occupancies

Specific Equipment

Filters